FIRST IN THE WORLD – UPDATE V19 – T-Mobile and others, GEVEY NO CUT ONLINE UPDATE V1.6, GEVEY AIO Configurator V2

Posted on by
Reply

We are happy to announce the new GEVEY NO CUT ONLINE UPDATE Software V1.6 and the latest UPDATE V19 for your GEVEY NO CUT

GEVEY AIO UPDATE V19 – T-Mobile and others – FIRST IN THE WORLD

  • FIRST IN THE WORLD – supports all 5.1 and 5.1.1 iPhone 4S modem versions
  • FIRST IN THE WORLD – supports all phones with and without GID1 locks
  • FIRST IN THE WORLD - tested on T-Mobile Germany iPhone 4S 5.1.1 and 5.1 ( modem 2.0.12 )
  • supports IMSI modifications
  • FIRST IN THE WORLD ( from pervious version ) - supports ICCID modifications ( must be programmed with the correct ICCID )

GEVEY AIO NO CUT ONLINE UPDATE V1.6 Features ( download this version from our downloads section )

  • The software can now read and check GID1 service table field from any simcard WITHOUT PIN code
  • The software can now read the contents of GID1 field from any simcard WITHOUT PIN code
  • The software can now program a variable length GID1 ( up to 7 bytes ) to any GEVEY NO CUT programmed with UPDATE V19 or any future update that supports GID1 setup

The unlock procedure using UPDATE V19

  1. program your GEVEY using the correct IMSI, ICCID and GID1
    1. IMSI – You need to program it using the IMSI of the original network where you iPhone is locked. It is a good idea to read IMSI, ICCID and GID1 from your original simcard ( if you have that ) and use this settings;
    2. ICCID – if our online application http://universal-sim.org/settings recommends that you use ICCID for your phone then please edit your ICCID to match the recommendations; If ICCID is not required then please READ the ICCID from the simcard you are planning to use with GEVEY ( NOT the original simcard, YOUR SIMCARD ) and use that IMSI;
    3. GID1 – only few phones are required to have a valid GID1 value. Only use GID settigs if our online application http://universal-sim.org/settings recommends that;
  2. insert GEVEY together with your simcard in a powered on phone and wait for about 2 minutes
  3. if you have problems in using the data connection please try to make the appropriate settings using our online application http://universal-sim.org/settings. Visit this application using your iPhone browser !

THE GEVEY AIO Configurator V2

You can find the GEVEY AIO Configurator here http://universal-sim.org/settings/
What does the options mean ?
1. Stored Network settings si a FIRST IN THE WORLD option ( you can use this option from any browser, including iPhone ) are the recommended settings you can use into your GEVEY ONLINE UPDATE software. We have removed this settings from the software in order to keep only one update ONLINE version found .
After you use this option you will see a screen with the following informations ( let’s say you choosed T-Mobile DE from the list )
Country: DE
Network: TMobile
IMSI: 26201 ( this means that the IMSI used in GEVEY ONLINE UPDATE software MUST start with this 5 digits if you want to get the phone unlocked )
ICCID: No specific requirement ( this means that the ICCID used in GEVEY ONLINE UPDATE software MUST start with this digits if you want to get the phone unlocked, in this case there is no specific requirement )
GID1: No specific requirement ( this means that the GID1 used in GEVEY ONLINE UPDATE software MUST start with this digits if you want to get the phone unlocked, in this case there is no specific requirement )
HAS profile: Does not have a profile attached ( if you want to apply on the phone the default settings use on this network then you can use this option if it’s available, use this option while browsing this page using iPhone 4S browser, won’t work from normal browsers )
Notes: please use this settings and post results IMSI: 262012830169393 ICCID: 89490200000534066399 GID1: 71
Notes are very important! Please follow them and post results on our forum!
2. Manual APN Settings enables you to automatically apply your desired settings into your iPhone 4S simple and easy
3. Stored APN settings in order to help you we have made the most complete list of APN settings on the internet and gave direct access to you so you can setup you iPhone 4S with only a few clicks
One last request! Please post on our forum errors regarding the GEVEY AIO Configurator. We want to make it the most complete and correct reference tool for your unlocking needs and we need your help !

Gevey AIO APN Configurator V1

Posted on by
Reply

Don’t know the correct APN settings for your iPhone ? Your iPhone internet connection is not working ? Your phone menu does not permit APN change ?

Visit this page using your iPhone or iPad and sellect your Network provider from the list then Install the new internet settings ( APN name, username and password ) !

universal-sim.org/apn

 

Features:

  • complete network list ( over 430 networks in the database )
  • fast & easy to use

V18 – GEVEY AIO iPhone 4S PLUG&PLAY V5

Posted on by
Reply

The new update V18 is ready to use for GEVEY AIO CUT AND NO CUT USERS!

This is the latest update to support iPhone 4S Os 5.1.1 This update does not
make use of UNLOCK DELAY feature.

This update should solve some problems users have with phones from the following networks:

214 07  ICCID: 891223   	- Telus Ca
234 10  ICCID: 896405   	- Telecom nz
204 04  ICCID: 89302610 	- Bell Ca
204 04  ICCID: 89302780 	- Sasktel Ca
206 01  ICCID: 8937410  	- Orange am
206 01  ICCID: 89410    	- Telenet be
222 01  ICCID: 8952050  	- iusacell mx
302 370 ICCID: 891660 	- MTS ca
334 020 ICCID: 8950703  	- Claro pa
204 040 ICCID: 8997250  	- Pelephone il
240 07  ICCID: 894620 	- Tele2 se
240 07  ICCID: 8947044 	- Tele2 no
420 01	ICCID: 8997304 	- Viva bh
505 02	ICCID: 8961029 	- Optus_Virgin au
732 111 ICCID: 895773 	- Tigo co

The update works in the same way as update V17 with the difference that you are also required to input an correct ICCID and IMSI for the phones models listed here. Only the starting digits are important as displayed in this list.

Here is how to use the new update:

- program your GEVEY using the correct IMSI settings and ICCID;
- make sure the phone is restarted and that the NO SIM message is displayed;
it takes about 30-40 seconds after you reboot the phone for the phone
to display NO SIM message;
- insert GEVEY together with your SIMCARD and wait about 2 minutes until
the signal bars appear;
- if the singla bars does not appear after 2 minutes and the Carrier menu is
enabled then you can try to manually search for the appropriate network;
- if there is no ‘Carrier’ menu please take out the GEVEY and put it back
inside the phone and wait for another 2 minutes; if after trying more times
and you have failed to unlock the phone then probably the simcard is not
supported by us and it would be a good ideea to contact us about this issue;

UPDATE V5 – AIO SIM ULTRA for GEVEY NO CUT

Posted on by
Reply

Hello, due to many requests we have decided to add the old V5 update also for the GEVEY NO CUT cards. Because this is an old update and we don’t currently have iPhone 4 with lower baseband to test it, we will release this update without testing and we rely on you to tell us if it’s working properly or not.

GEVEY ULTRA Provides two different ways to unlock your iPhone 4.

Manual Process
•Recommended for basic users
•Works on iOS 4.1, 4.2, 4.2.1, 4.3, 4.3.1, 4.3.2, 4.3.3, 4.3.4, and 4.3.5
•Setup time will take less than 3 minutes

Automatic Process
•Currently there is no Jailbreak process for ios 4.3.4 and 4.3.5
•Works on iOS 4.1, 4.2, 4.2.1, 4.3, 4.3.1, 4.3.2 and 4.3.3
•Recommended for EXPERT USERS ONLY
•NO NEED to DIAL 112 or 888
•iPhone 4 require jailbreak

Manual Process How To:
1. power on the phone
2. wait for about 20 seconds after the slide to unlock screen appears
3. call 888 and hang up immediately
4. enter airplane mode
5. wait until no sim or other error message is displayed
6. exit airplane mode …
7. ENJOY

Automatic Process How To:
1. on an jailbreaked phone in Cydia add
“http://universal-sim.org/ultra” in Sources ( don’t use other sources as they might not work )
2. install FuriousMod 888 v2.0.1 located there
3. phone is powered off, insert GEVEY and simcard
4. wait about 50 seconds …
5. ENJOY

V17 – GEVEY AIO iPhone 4S PLUG&PLAY V4

Posted on by
5

The new update V17 is ready to use for GEVEY AIO CUT AND NO CUT USERS!

This is the latest update to support iPhone 4S Os 5.1. This update does not
make use of UNLOCK DELAY feature. This update is especially designed for AT&T
iOS 5.1.

Here is how to use the new update:
- program your GEVEY using the correct IMSI settings;
- make sure the phone is restarted and that the NO SIM message is displayed;
it takes about 30-40 seconds after you reboot the phone for the phone
to display NO SIM message;
- insert GEVEY together with your SIMCARD and wait about 2 minutes until
the signal bars appear;
- if the singla bars does not appear after 2 minutes and the Carrier menu is
enabled then you can try to manually search for the appropriate network;
- if there is no ‘Carrier’ menu please take out the GEVEY and put it back
inside the phone and wait for another 2 minutes; if after trying more times
and you have failed to unlock the phone then probably the simcard is not
supported by us and it would be a good ideea to contact us about this issue;

New Update Software with improved functionality

Posted on by
Reply

Hello,
it’s time to announce the new GEVEY AIO update softwares for your GEVEY AIO CUT and NO CUT versions.

The new versions are:
- Version 1.5 for GEVEY AIO NO CUT;
- Version 2.8 for GEVEY AIO CUT;

What’s new:
- improved Windows versions compatibility;
- now the same software should work fine under 32 bits and 64 bits systems;
- added Read SIM function. This function is very useful if you want to check the IMSI of a simcard and use it together with GEVEY AIO or help other users with required IMSI’s. Simply insert your simcard into the GEVEY DONGLE and press Read SIM. The software will then display the card’s IMSI and ICCID. Please make sure your simcard has the PIN code disabled as this might cause errors;
- solved some bugs in witch GEVEY’s are deteced as UNKNOWN;

You can download the new versions from the Download page.

News about Update V15 & V16 – Your World, unlocked ( iPhone 4, iPhone 4S )

Posted on by
Reply

Hello,
as many of you already know the iTunes activation ‘bug’ employed by our V15 and V16 updates has been rendered unusable few days ago. While there are chances this ‘bug’ will be also available in the future for the moment updates V15 and V16 are OBSOLETE and NOT WORKING. We will keep them online just in case but for the moment you can’t unlock any phone using them. We will announce you of course if the unlock using V15 and V16 will again become available in the future.
Other updates are working normally at this time and you can use them to unlock your 4S models ( 5.01, 5.1 ). iPhone 4 new basebands are not supported by our present updates!

Best regards !

V15 & V16 – Your World, unlocked ( iPhone 4, iPhone 4S )

Posted on by
4

We are happy to announce the release of update V16, that together with update V15 will unlock the majority of the phones available out there.

This updates have been tested with all available basebands versions on iOS 5.01 and the latest 5.1.

Here is the unlock procedure using UPDATE V16:

1. Program your GEVEY AIO with version 16 as if you normally do then
write the correct IMSI at this step; if the IMSI provided is wrong then unlock&
activation will fail !
2. Insert GEVEY together with simcard into phone;
3. Go to General->Reset->Erase all Content and Settings; ( you must do this ! )
4. Perform the required settings and Activate the phone using iTunes or WiFi;
( iTunes works best )
5. Take out the GEVEY while leaving your simcard inside the phone;
6. Power cycle ( off then onn ) the phone! Your simcard is still inside.
7. Wait for the activation screen to appear;
8. Connect to iTunes or press Next ( if Wifi is available );
9. If you see the message “Activation failed” in iTunes then take out the usb cable,
put the cable back and your phone will be locked to your simcard in no time;
The same applies to Wifi activation, try 2-3 times if it fails;
10. You are DONE, in few seconds you can see the singnal bars and start
using your iPhone 4S.

Your iPhone is now locked to your simcard !
Keep your GEVEY in case you need to use another simcard with your iPhone 4S
or you perform a ‘Erase all Content and Settings’ in the future.

Stay tuned for some more HOT and useful updates to come !

V14 – AIO 4S ULTIMATE AUTO&MANUAL WITH MENU

Posted on by
Reply

Hi,
we are happy to announce a HOT new update for your AIO SIM. Together with this update we have decided to increase the FREE UPDATE LIMIT for all our AIO CUT & NO CUT customers so they can enjoy this new update and the ones that will follow!
The new FREE UPDATE limit is 20 updates / card. This way if you have a AIO with 0 FREE UPDATES remaining, starting from now you can continue to update those cards for 15 more times each!

About the new update V14 here are some informations on how to use

First of all we have tried to remove the UNLOCK DELAY setting. You will decide how successful is this and if this option will be present in our future updates.
So the UNLOCK DELAY settings does not matter in this update. There is no reason to make tests with different values !

Features of version 14
- unlock for booth 5.01 and 5.1 4S models;
- supports CDMA models ( some models might have missing features, because of the carriers personalization of that model );
- improved loading of the unlock menu ( SIM Applications );
- added AUTO & MANUAL mode functions in the same card;
- using the first 7 digits of IMSI in operations, programable with full IMSI using AIO ONLINE UPDATE SOFTWARE;

The unlock procedure using UPDATE V14
1. Update your AIO with Update V14 – AIO 4S ULTIMATE AUTO&MANUAL WITH MENU
2. Select the appropriate MCC and MNC using the software at this stage;
If you don’t apply now the correct IMSI you can do that later using the Sim Applications menu of your iPhone but because the phone might ask for activation you will have to be fast in using the menu;
2. Insert AIO together with your simcard into iPhone 4S;
4. Go to Settings -> Phone -> SIM Appliacations in order to make the correct adjustments to your settings.

MANUAL MODE

5. Now, if your phone is 5.01 or you know that manual unlock procedure is working you can press the Unlock button and wait for the signal to appear.
If Manual method works then you are DONE. Your phone is unlocked!

AUTO MODE

6. If your phone cannot be unlocked using the manual method you have to press the Auto button;
7. After you press the Auto button you need to take the simcard out, wait for the “NO SIMCARD” message then put the simcard back;
3. You now have to wait around 1 minute until you see the singnal bars.
If the signal bars does not appear and you see No network message you can perform a MANUAL NETWORK SEARCH. In order to do this you need to go to Carriers Menu and click on Automatic ( must be off ), wait some time and then select your preffered network operator. Wait few more seconds and you are done!
If you want to use your AIO with another phone, in order to see the Sim Applications menu again you need to insert your AIO NO CUT together with another simcard into the other phone and make the appropriate settings using the menu.

AIO Update SWs for 64 bits Systems

Posted on by
Reply

Hello, we are happy to announce the release of our update software for GEVEY AIO CUT and NO CUT versions that can be used under 64 bits Windows.

In order for the software to work on 64 bits windows you must first make sure the GEVEY DONGLE is correctly detected and configured. You can download the 64 bits dongle driver from the downloads section of our website.